- Deco Dampproof Coating - 5 gal.(Shipping Included) #DD5

2 review(s).

Availability: In Stock
Usually ships In Same Day notify me

Price: $165.00

Deco Dampproof - Earth Friendly Every Time

DD5 our 5 gal. Deco Dampproof coating is a water based acrylic designed to protect foundation walls and other concrete applications from moisture penetration.

ICC classified as a dampproof material above and below grade
Tested by SGS U.S. Testing Co. Inc.
UV resistant, high quality product, no solvents or black stuff
Liquid applied by roller or airless sprayer – easy to apply
Seamless, no cutting, taping or nail guns as w/ sheet membrane products
0% VOC's, paintable, dries gray, no odor
Easy to apply and meets all STATES building codes :)
No mixing or trowel on, product ready, easy cleanup
Easy to spray or roll on and an excellent alternative to tar which is limited to grade line issues unless a protection board is applied. You do not need a protection board with DD55.

Deco SEAL Applications

Foundation Walls:

Parged & Non-Parged Block, Precast, Poured Concrete, ICF & Styrofoam Walls.

Preparation:

Remove all dirt, dust, oils, foreign material which is to be coated.
Fill or repair any cracks, honeycomb, wall ties, holes, etc. with Deco Tie Patch or concrete repair caulk/patch.
New Construction - Surface must be dry to allow for proper adhesion. Can be applied on green concrete. The American Concrete institute (ACI) defines green concrete that has set but not appreciably hardened.
Use 2000+ PSI airless sprayer such as Graco 7900 Airless Sprayer for best results.
Apply at 32-95 degrees otherwise cold or evaporation will affect curing dry time and coverage rate
Do not apply with the threat of imminent rain. Perform test to insure desired results.
Dry cure rate is 12 hours. Dependent on temperature, airflow, humidity.

Deco Dampproof - Technical Information

ICC (International Code Council) Classification:

An evaluated and approved dampproof material above and below grade

Deco Seal Characteristics:

Water based acrylic resin, smooth, opaque, Gray viscous liquid
Odor of a latex waterborne system
Non-Hazardous, Non-Toxic, Non-Carinogenic/Cancerous
Prolonged contact may cause irritation
No Solvents, UV resistant therefore applicable below grade and above grade

DECO 20 Dampproof meets or exceeds the following ASTMs: 

ASTM D 2939, Resistance To Water. Rating Number 1- No-Softing - no loss of Adhesion, or reemulsification 
ASTM D 2939, (Section 16) “Flexibility” Rating Number 1 - No cracks hairline or otherwise, no loss of Adhesion 
ASTM D 6489, “Water Absorption”
 ASTM C 836, Film Thickness On Vertical Surface. 
ASTM D 2665, Color Fastness Of Surface Coating - UV Resistance 
ASTM D 3273-9, Resistance to Mold Growth Of Surface Coating
 ASTM D 1227 Type III Class 1 - Suitable for use as a protective coating for built-up roofs and other exposed surfaces with specified inclines