Price: $78.00

    StripaCast is an environmentally non-hazardous stripper designed to remove old coatings from concrete pavers, stamped concrete, masonry surfaces. Contractor grade. Easy spray on. Smells like lemon pledge. Superior job removing acrylic, urethane or film forming coatings/sealers.

    • Spray on w/ garden, hand pump or airless sprayer, 1 coat application. Do not let Stripcast dry, keep wet
    • Wait 45-60 minutes if you need to apply a second coat to prevent drying or place tarp over application.
    • Powerwash - The stripper will remove like dead skin or a white film. Can be slippy when removing existing sealer.
    • StripaCast smells like a strong lemon pledge. Wear glasses or safety googles.
    • Non-Hazardous will not harm grass, shrubbery, etc.

    StripaCast Applications

    1. Pavers, Stamped Concrete, Masonry, Stone, Veneers, etc.
    2. Any substrate that has existing coatings or sealers on surface. All acrylic sealers after several coats need to be removed.
    3. Driveways, patios, pool areas, walk ways, porches, etc.


    • Always perform a small test before tackling your entire project. This will ensure desired results. Spray in a 2'x2' area wait 30-45 min. before power washing.
    • Apply when temperatures are between 45-85 degrees. Do not let product dry, place tarp over Stripacast.
    • Do not apply with the threat of imminent rain.
    • Pour StripaCast into any sprayer (hand pump, garden, chapin or airless) and then apply a flood coat on the surface. Do not let Stripacast dry. It must stay continuously wet. Place tarp over Stripacast 45-60 min.
    • Wait approx. 45 minutes. This is dependent on how many previous sealers/coatings were applied on your application. Silacast will become difficult to powerwash off the surface if you don't wait long enough. You should begin to see a white film appear before powerwashing.
    • Powerwash and spray each block, brick, stone, joints, etc. It will look like skin or a white film peeling off the surface.
    • Non-Flammable, Non-Caustic. Smells like a strong lemon pledge. Safe on shrubbery, grass.
    • Use proper safety glasses when spraying. Do not spray on windy day.

    Coverage Rate

    1 gallon = 200 sq.ft (based on smoothness/roughness of surface) 1 coat application

    *Keep product wet do not let dry especially on hot days. Cover w/ tarp if necessary for 45-60 min. Staying wet softens the sealer/coating you want to remove.

    Overall Customer Rating of 1 Reviews:
    review-star review-star review-star review-star review-star

    excellent product excellent service

    review-star review-star review-star review-star review-star
    worked as described. Need a turbo tip for your pressure washer for ease of removal

    Availability: In Stock
    Usually ships In Same Day
    Item #: Strp-01